What Tech Is Next for the Solar Industry? | MIT Technology Review

What Tech Is Next for the Solar Industry? | MIT Technology Review

Green says this and other techniques will make it cheap and practical to replicate the designs of his record solar cell on production lines. Some companies have developed manufacturing techniques for the front metal contacts. Implementing the design of the back electrical contacts is harder, but he expects companies to roll that out next.
Meanwhile, researchers at the National Renewable Energy Laboratory have made flexible solar cells on a new type of glass from Corning called Willow Glass, which is thin and can be rolled up. The type of solar cell they made is the only current challenger to silicon in terms of large-scale production—thin-film cadmium telluride (see “First Solar Shines as the Solar Industry Falters”). Flexible solar cells could lower the cost of installing solar cells, making solar power cheaper.
One of Green’s former students and colleagues, Jianhua Zhao, cofounder of solar panel manufacturer China Sunergy, announced this week that he is building a pilot manufacturing line for a two-sided solar cell that can absorb light from both the front and back. The basic idea, which isn’t new, is that during some parts of the day, sunlight falls on the land between rows of solar panels in a solar power plant. That light reflects onto the back of the panels and could be harvested to increase the power output. This works particularly well when the solar panels are built on sand, which is highly reflective. Where a one-sided solar panel might generate 340 watts, a two-sided one might generate up to 400 watts. He expects the panels to generate 10 to 20 percent more electricity over the course of a year.
Such solar panels could be mounted vertically, like a fence, so that one side collects sunlight in the morning, and the other in the afternoon. That would make it possible to install the solar panels on very little land—they could serve as noise barriers along highways, for example. Such an arrangement could also be valuable in dusty areas. Many parts of the Middle East might seem to be good places for solar panels, since they get a lot of sunlight, but frequent dust storms decrease the power output. Vertical panels wouldn’t accumulate as much dust, which could help make such systems economical.
Even longer-term, Green is betting on silicon, aiming to take advantage of the huge reductions in cost already seen with the technology. He hopes to greatly increase the efficiency of silicon solar panels by combining silicon with one or two other semiconductors, each selected to efficiently convert a part of the solar spectrum that silicon doesn’t convert efficiently. Adding one semiconductor could boost efficiencies from the 20 to 25 percent range to around 40 percent. Adding another could make efficiencies as high as 50 percent feasible, which would cut in half the number of solar panels needed for a given installation. The challenge is to produce good connections between these semiconductors, something made challenging by the arrangement of silicon atoms in crystalline silicon.